Axis Devices
To locate any kind of Axis IP devices in the network, click Axis IP Utility to open the corresponding Axis tool.
This utility also allows you to access devices that have IP numbers from another IP range.
Note: If VSP cannot find the cameras, but the Axis IP Utility can, verify the local IP number for the build-in Ethernet connection of your computer, to which the dedicated Mangold-Camera-Network should be connected.
It should per default be set to 192.168.0.1. If the listed cameras have IP-number like 192.168.0.x and VSP cannot find them, the network adapter of your computer has most likely been altered.
Further details about the correct setup can be found in the chapter Installation.
Options, mainly for trouble shooting:
oWarn if camera firmware is lower than version
oDisplay all Axis Media Control errors
oCheck NTP time before recording
Network protocol Selector
Enables different communication methods with the cameras to resolve communication issues.