To log Intensity information, an additional Code Definition file is required. You can use multiple Code Definitions within the same file without a hassle.
Intensity Code Definition
Again, the Codes are a simple list of the applicable intensities:
oFor each single-frame Event a single Intensity is entered into the Codes column.
oAs a key, the exact same characters can be used in the Key column.
oBecause we only need single frames, make sure the Duration is disabled for all Intensity-Codes (Clear the selection in the Dur column)
oThe EOC selection is not always required for the described approaches for coding intensity, but in this case it does not hurt in any of the examples either.
o